Dual USB Ports
Apple: iPhone 6s, 6S Plus, 6, 6 plus 5S, 5C, 5, 4S, 4, 3GS / iPod / iPad, iPad mini, etc
HTC: One X, S, V / Sensation Series / EVO 4G / Radar 4G / Inspire 4G / Vivid 4G / Wildfire S / Desire series, etc.
Samsung: Galaxy S Series / Galaxy Note Series / Galaxy Nexus / Focus S / Infuse, etc.
Motorola: Droid Razr, Bionic / Atrix / Triumph, etc. LG: Nexus, Optimus Series, etc.
Nokia: Lumia Series / N8 / N9, etc.
Others: Blackberry / Sony Ericsson / PSP / Nook / MP3 MP4 MP5 / GoPro / Amazon Kindle series, etc.
Compatible with most 5V input USB powered devices that can draw over 120mA of current.
Capacity: 16,750 mAh 3.7V / 62.0Wh
Battery Cell: Premium high-density Lithium-ion
Dimensions: 5” x 2.9” x 1” (127 mm x 73 mm x 24 mm)
Weight: 11.4 oz / 320 g
Input: 5V 1.5A Max (Charge), 5V 2.0A Max (Charge-through)
Input Charging Time: ~15 hours (1A); ~11 hours (1.5A)
Output: 5V 2.1A (Max)
Product Life: Over 500 full charge-discharge cycles
Operating Temperature: 32°F to 113°F / 0°C to 45°C (Charging); -4°F to 149°F / -20°C to 65°C (Discharging)
Connect one end of the charging cable to a powered USB port. Examples of powered USB ports include those found on a computer, a plug-in wall charger, or a solar charger. We recommend using a 5V/2A (10W) charger such an iPad wall charger for maximum charging speed. Please do not charge the Zendure with a single output over 5V/3A.
Connect the other end of the cable to the Micro USB input port on your Zendure. If the power source is active, your Zendure should begin charging immediately. Your Zendure may remain connected to the power source indefinitely; there is no risk of overcharging it.
Charge status will be displayed by the status lights on your Zendure. Please refer to the table on page 3.
Connect one end of the included USB cable or other USB cable to the USB output port on your Zendure. Connect the other end of the USB charging cable to the charging port on your compatible device, using an appropriate adaptor if necessary.
Your Zendure will automatically begin charging most devices when connected if the current drawn is over 120mA. If charging doesn’t start on its own, press the power button briefly to begin charging.
While your Zendure is charging your device, the status lights on your Zendure will indicate the remaining charge. Please refer to the table below.
If your Zendure’s status lights are not already lit, press the power button briefly. If the lights still do not turn on, your Zendure has no charge remaining. The status lights on your Zendure will indicate your product’s remaining charge. Please refer to the table below.
|Charging Devices||Charging Zendure||Capacity|
This product includes an 18-month limited warranty, starting on the date of purchase, excluding accessories. Free exchange or repair service is offered to rectify manufacturing defects or other quality issues during the valid warranty period. Please note that the warranty will be void if product has been misused, disassembled, or physically damaged. Warranty service is only available for products purchased through authorized sellers, and proof of purchase is required.
For warranty service, please fill out our Support Form and we will get in touch with you as soon as possible.
Although the Zendure A-Series battery is designed to be extremely durable, and it can be run over by a car in our tests, please do not attempt to stage your own durability trials.
For most batteries on the market, energy loss during charging reduces the effective capacity by up to 30% of the total power. That means their total energy conversion rate (TECR) is only 70%. Zendure A-Series batteries have an amazing 80% TECR.
To approximate how many times a Zendure battery can charge your device, multiply the battery's capacity by 0.8, and then divide it by the capacity of your device. This formula assumes that the device's nominal voltage is about 3.7V, is charged at 1A in a 25°C environment, and is powered off and not in use when being charged. Actual results may vary s lightly depending on whether the device is in use, output used, temperature, how much heat the device's battery generates, the condition of the device, etc.
In charge-through mode, the total maximum input is 2.1A, however, the output of the Zendure to the device is limited to 1.3A, and the input from the power source to Zendure is limited to 1.5A. Depending on the charge level of the Zendure and the device you are trying to charge, the 2.1A current is distributed between Zendure and the devices. If the Zendure is low in power (for instance only 1 to 2 LED lights), the voltage that goes out from Zendure to charge the device will be lower than 4.6V. In this situation, the device will think the power source is a low-power one, and thus the output drawn might be only 0.4A to 0.5A. As the charge level of the Zendure goes up, the voltage that it outputs will also go up to 4.8V, and the output to the device could be up to 1.3A.
Some energy will be consumed if there’s a USB connection, so please remember to unplug all USB cables for long-term standby. Please charge the external battery at least once every 6 months.
Make sure that your Zendure is connected to a compatible powered USB port as outlined in the “Charging your Zendure” section of this manual.
Check that the power source is activated. If connected to a computer, make sure the computer is turned on. If connected to a wall charger, ensure that the power outlet is active.
Your Zendure’s multi-protection system may have been engaged. Please refer to the “Multi-protection system” section of this manual.
Ensure that the device is a 5V powered device, and it draws over 120mA of current.
Zendure’s auto-charge capability may not be compatible with all devices. Press the power button to activate your Zendure.
Ensure that your Zendure is charged. Please refer to the “Charging your Zendure” section of this manual.
Your Zendure’s multi-protection system may have been engaged.
To enhance product safety and reduce the risk of permanent damage, your Zendure is equipped with a protection system that temporarily deactivates the device in a number of circumstances, including product overheating, electrical overload, short circuits and connection to an incompatible device. If your Zendure’s multi-protection system is engaged, please follow these steps to reactivate it: